| || |
CarPro CQuartz UK Edition (50ml)
Coat your car with the glossiest and hardest coating available on the open market!
The incredible 70% SiO2 with 99.9% purity formula is based on the same technology as the original Cquartz with some interesting tweaks. Other ceramic coatings have far less SiO2 (Quartz) in the product however CQUK has 70% SiO2 with 99.9% purity. This is the first ever coating which has this concentration! The pure quality ensures the most transparent glass coat film over the surface, which guarantees long lasting coating with extreme strength and water-repellency. Once the liquid meets the open air it cures and forms a ceramic quartz hard coating on the surface with extreme hydrophobicity and gloss beyond even that of CQuartz.
SiO2 is one of the hardest material in the world. It creates a very clear but still long lasting hard coating on automotive surfaces.
(1) 50ml bottle of CQuartz UK Edition (Approximately 3-4 average size vehicles)
(1) Applicator Block
(4) 4" Microfiber Suede Applicators
(1) 16" Microfiber Suede Towel
Protection and gloss comparable or better than our competitors "professsional coatings" but easy to use for all detailers
CQUK has 70% SiO2 with 99.9% purity!!!
Extremely deep, rich Gloss
Easy maintenace with "self cleaning" properties (Stays cleaner than waxes, sealants and other coatings)
Resistance to Wash Induced Marring
Average thickness of Cquartz UK layer is between 1 Ám ~2 Ám per layer
Minor swirl filling abilities
Repels water, oils, dirt, and contaminants
Protection from UV rays
Resists stains, bird droppings, water spots, and traffic film
Ultra hard CQuartz UK contains ceramic nano particles found within glass, the result is a highly reflective, transparent layer.
Can also be layered: Allow 1 hour minimum wait time after buffing to allow cure before applying another coat.
Surfaces you can protect with CQuartz:
Durability: 2 years or more
Thickness: 1~2 Micron per coat
Coverage 10ml per coat +/-
Water contact angle: 110░
Light swirl filling properties
Recommended working temperatures: 40F to 90F
CarPro USA Preparation Tips:
If contamination exists it is recommended that you IronX and clay your vehicle before polishing.
To gain the most from Cquartz it is recommended that your vehicle have all painted surfaces clean and polished to a high standard.
Use CarPro Reflect to achieve an incredible high gloss finish in less time with less mess.
Use CarPro Eraser to remove all oils leftover from polishing which would hamper the penetration of Cquartz and compromise durability.
Wrap a 4" mf Suede around the applicator block
Shake CQuartz UK
Slowly open bottle and drag one line of product across applicator
Spread across paint in a criss cross pattern approximately 2-3 sq ft depending on conditions
Using a 16" Suede mf towel followed by a CarPro BOA towel and wipe off residue BEFORE it becomes sticky
Be sure to remove all excess residue and only then do you move to next section
Switch out applicators often
CarPro USA After Tips:
Park vehicle in direct sun after application is complete.
Keep surface dry for at least one hour after application
Wipe any water off the surface during the first 24 hours after application
Avoid washing with any soaps for the first 7 days
Do not apply in direct sun or on hot surface
Do not re-use 4" Suede applicators
Do not re-use the towels you used to buff off with unless you immediately toss them in a bucket of APC after use to avoid glass crystals forming on them
Wear hand protection (disposable gloves)
Avoid vapors and use suitable respiratory protection"
One 50 ml bottle of CQUK